192.168.1.1 is an IP address which is used to open the management panel of most of the ADSL modems or wireless routers. Type http://192.168.1.1 into your browser to open management console of any device. There are many Private IP Address you can use to open management page of the device.

These enterprise companies use 192.168.1.1 IP address as management page IP address Asus, D-link, Netgear, Cisco, TPlink and a lot of companies related to IT world. An individual can change or manage the specific network configuration by accessing http://192.168.1.1 IP Address. To do that, one must need accurate username and password.

You can access router using http://192.168.1.1 or click the button to access it directly

    192.168.1.1 Admin        192.168.0.1 Admin

192.168.1.1 IP address is considered as the primary IP address. This 192.168.1.1 IP address plays an important role in helping the user in troubleshooting the issues associated with the router.

In short, we can say that this IP address is a default gateway for most of the routers and modems. This particular IP address is the common one. Other than 192 168.1 1, you may also find 10.0.0.1 or 192.168.0.1 in some cases. These IP addresses are usually used as a default gateway for the network.

192.168.1.1. is a private IP address. The range of private IP address varies from that starts 192.168.0.0 and goes up to a maximum of 192.168.255.255. 192.168.1.1 we use it for default gateway on many devices including router, switches, wifi devices and many more.

Purpose of using 192.168.1.1 IP address as default gateway because it is easy to remember and the first IP address is 192.168.1.0 IP range. There are 256 IP addresses in 192.168.1.0 IP address range and out of 256 IP addresses 254 are usable.

192.168.1.1

What is 192.168.1.1

You may be one among those people who are keen to know what this 192.168.1.1 does actually mean. A private network that uses private IP address space which is 10.0.0.0/8 – 10.0.0.0 10.255.255.255, 172.16.0.0/12 – 172.16.0.0 – 172.31.255.255, 192.168.0.0/16 – 192.168.0.0 – 192.168.255.255, following are the standards set by RFC 1918 for Internet Protocol Version 4 (IPv4). These addresses are commonly used for home, office, and local area networks – LANs.

192.168.1.1 is nothing but an IP address used commonly for modems and routers as a default gateway predefined by the manufacturers to easy to remember for users. you can access new devices by using http://192.168.1.1 Many people have searched on the web about 192.168.1.1 on the internet.

Moreover, most people are confused with the last two digits of this IP address. Some people had thought the 192.168.1.1 as 192.168.l.l which is a grievous error. Yes, both of these look similar to each other and it is obvious for the not-so-technical people to get confused.

Now, as we’ve cleared it out that this IP ends with 192.168.1.1 instead 192.168.l.l, you can return to this website if you miss any information or get confused in the future.

 

What To Do With 192.168.1.1

As we’ve discussed earlier that if you are putting 192.168.l.l, you are doing wrong. It is not the real IP. Real IP is in numerical 192.168.1.1. Make sure you are typing the correct IP address if you want to access your router.

These are host addresses and if you log on to 192.168.1.1, you will be prompted to a window from where you can access the modem or router by simply putting the username and password. In most cases, the default username is “admin” while the password remains the same which is “password.”

As soon as you hit the “enter”, you will be logged into a new window where you will have the control all the configuration of your router. Here, you can manage all the settings associated with the router.

Most often, people use this panel only when they face issues arising from the routers like slow internet speed etc.

Now, after you’ve logged in, you can access the management panel of network devices. You will have all the privileges that an admin receives.

Here you can change the settings as per your requirements and can configure the software related to the router.

In the dashboard, you will see a wide range of tabs and options such as proxy, LAN, DNS, ADSL, MAC, WPS, Security, Options, WAN, WLAN, settings, ADSL, Network Management, port forwarding, DHCP, NAT etc. If you are not a technical person, it will take you a plentiful amount of time to understand all the options. You may also require searching for the specific term to get the basic knowledge.

How to Login to Wireless Router using 192.168.1.1

In order to router login, you have to visit http://192.168.1.1 Open your browser and enter the link in the address bar. It will not work if you are typing the wrong IP address i.e. 192.168.l.l. As you enter the correct IP address, you will be prompted to a login page. Here you can access the router.

If you’ve changed the username and password from default then carefully enter the correct username and password. if you forget the changed username and password then you need to reset the router.

No sooner you do this step than you will be taken to the admin dashboard. Also, you can simply navigate the buttons which are available straight ahead on the top. This will also take you to the login page.

The default username for the router is “admin” and password is “password”. If you are unable to log in the account, replace the password from “password” to “admin”. Some routers use the password as “admin” itself.

192.168.1.1 LOGIN PAGE, USERNAME, PASSWORD

If you have to secure your modem or router, you strictly have to change the username and password from default to something strong. We’ve seen many cases where the hackers or someone else gets into the router and use the information.

They can even suck all your internet data. or take control of your network and devices. you can find the list of default Router Username and Password here.

Keeping the username and password strong is always a good choice. Moreover, it is simple and easy. You don’t have to search through the many options to change the login information. As soon as you change the username and password, you’ll be the only one who can access the router or modem.

The good thing about the routers is that if you want to change the settings and bring back the default settings of the routers, you can simply press and hold the reset button for a few seconds provided at the back of the router.

There is a wide range of configuration available in the router control center in case of security regarding Wi-Fi.

The only important point is to change the default SSID network name. The basic purpose of this is to determine the network connection. Also, changing the default SSID network name will ensure high security.

Always choose a unique and strong name for the SSID network. Avoid using your name or your family member’s name. This will give your internet strong security and no one can determine your Wi-Fi connection until you choose to tell the other person. It will always remain safe.

To know how to hide the SSID network name, you can refer to the manual came along with the router because there is no common process for it. Every router has different process to disable SSID broadcast network name. However, the process is really simple. Just go through the manual and you will find the procedure.

It may also happen that you’ve changed the username and password and now you’re unable to recall it. You might have forgotten or you’ve randomly tried out the combination of the password just for an experiment.

In this case, continue reading the post.

Forget The Username And Password of your Login Page 192.168.1.1

It is a common issue that most of the people face. People even forget their login credential for ATMs and Credit Cards, and forgetting the username and password of the wifi routers is common. But the need to access the internet creates annoyance if you have forgotten the login information.

The best way to solve the issue is to reset your router. You can do it by pressing and holding the reset button provided at the back of the router. You may require a pinpointed material to do so. You can use the toothpick or the refill of your pen.

You’ve to press and hold the button for about 20 seconds for resetting the whole router. What it will do is that it will bring back all the default settings to the router. Now, you can access default username and default password to access the router login. We’ve already mentioned the default login information above in the post or you can check our post how to login to the router.

Note: As soon as you reset your router, you are making the router change its setting to default settings. The settings you’ve made in the router manually will no longer remain there in the router. Now, the IP address has now become 192.168.1.1.

Therefore, go for resetting your router only if it is necessary. Otherwise, you may lose the setting that you’ve created as per your requirements and needs. Also, make sure to change the default password to a strong one after resetting the router.

People searching for the ways to change the Router Password can follow these simple steps — Login to your router admin page. Now, click on the advance setting. Go to router admin. Here you’ll find the panel to change the password. Type old password and then create a new password. For high security, use 11 digits in your password.

How To Find Router IP Address

The use of IP address is required if you want to configure your network. Without IP address you will never be able to login to your router and make the changes you want to do. Many people have asked the question how to find the router IP address.

Although most of the routers use the default IP addresses which are 192.168.1.1, 192.168.0.1, 192.168.0.1.1, 192.168.o.1.1, 192.168.2.1, 10.0.0.1, 192.168.1.254, 192.168.1.2, 192.168.l.l, it may also happen that you need different IP address than the default one to access your router login page. In that case, you’ve to search the IP address what the manufacturer has set.

you can read our other post regarding 192.168.1.1